.png)
.png){kind=logo}
PC-DC2000 universal controller is a general-purpose water quality controller.It is suitable for use with multiple water quality series digital sensors. It is used to monitor water quality parameters including pH,ORP, conductivity,dissolved oxygen, turbidity, sludge concentration,etc.The parameters are output to the monitoring room through RS485 or current transmission for record keeping.
Applications:
Features:
Dimensions:
Wiring:
220VAC wiring diagram
24VDC wiring diagram
Technical Specifications:
| Display | 2.8-inch monochrome LCD screen, resolution 128*64 |
| Dimension | 100mm×100mm×150mm |
| Cutout Size | 92.5mm×92.5mm |
| Monitoring parameters | pH/ORP/Conductivity/DO/Turbidity/Sludge Concentration |
| pH：(0～14)pH | |
| ORP：(-2000～2000)mV | |
| DO：(0～40)mg/L | |
| Saturation：(0～200)% | |
| Conductivity:(0～600)mS/cm | |
| Turbidity:(0～4000)NTU | |
| Sludge concentration:(0～120000)mg/L | |
| Current Output | (4～20)mA load capacity 500Ω, output accuracy ±0.2%FS |
| Communication | RS485 MODBUS RTU |
| Alarm | 2 channels, capacity AC250V/3A |
| Distribution Output | 12V/125mA |
| Relative Humidity | 10 ~ 85)% (no condensation) |
| Working Temperature | (0 ~ 60)0C |
| Input | 100-240VAC |
| Storage Conditions | Temperature:(-15 ~ 65)0C, Humidity:(5 ~ 95)% (no condensation) |
Ordering Information:
PC-DC2000-A-B-4-1-E
| PC-DC2000 |
Measure range: pH：(0～14)pH ORP：(-2000～2000)mV DO：(0～40)mg/L Saturation：(0～200)% Conductivity : (0～600)mS/cm Turbidity: (0～4000)NTU SS/TSS: (0～120000)mg/L |
|
| A | Input | RS485 based Sensor |
| B | Output | 4-20mA+RS485 |
| 4 | Alarm Output | 2 Channels SPDT |
| 1 | Electrical Interface | M16X1.5 Cable GlandX2+M12X1.5 Cable Gland |
| E | Power Supply | 220VAC |
| C | 24VDC | |
*** * Any one Sensor shall be used as a sensing device.
Minimum Order Quantity: 15 pieces
Facebook 
Twitter 
Linkedin